| QW Universal Machine |
|
|
Performance and characteristic:
|
|
1.It is made of high-quality cast iron
|
|
2.The accuracy of the vise (parallelism and squareness) is 0.025mm/100mm
|
|
3.Attained fitting with a stop in three way by using such circling delinable as
|
|
vise body.two way body and sliding base.
|
|
4.It is used on machining and EDM complex parts.
|
|
|
[Detail...]
|
| Q52150L Hydraulic Power Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of spheroidal cast iron.
|
|
2.The hardness of working surface is HRC50-60.
|
|
3.The accuracy of vise (paralleism and squareness) is 0.025mm/100mm.
|
|
4.Resist bending in place of teaditional clamping,it can produce strong clamping
|
|
by small pressure.
|
|
5.According the size of the workpiece,changing the position of the screw nut,it
|
|
can have four opaning.
|
|
|
[Detail...]
|
| QM16 Accu-lock Precision Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is main attchments to precision millings grinders CNC machines,it
|
|
isparticuarly suitable for the finishing of precision parts.
|
|
2.The accuracy of vise (parallelism and squareness) is 0.025mm/100mm.
|
|
3.The special segment in the movable jaw forces the verical pressure downward
|
|
when the horizontal pressure works,so that this jaw does not lift the
|
|
workpiece.
|
|
4.For positions allow extra capacity to change opening of jaw.
|
|
5.As the thrust component of the screw is equipped winh thrust neddle bearing it
|
|
can be easily operated
|
|
|
[Detail...]
|
| QM16N Accu-lock Precision Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of spheroidal cast iron.
|
|
2.The hardness of woaking surface is HRC50-60.
|
|
3.The vise with angle lockdevise can prevent workpiece rising during operation.
|
|
4.The accuracy of vise (Paralleism and squareness) is 0.025mm/100mm.
|
|
5.The vise can be using with single or settiong side by side on the machine
|
|
table.
|
|
6.It is widely used on machining center and othr precision machine tools.
|
|
|
[Detail...]
|
| Q93 Doubie-action Angle Tight Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of spheroidal cast iron.
|
|
2.The hardness of woaking surface is HRC50-60.
|
|
3.The vise with angle lockdevise can prevent workpiece rising during operation.
|
|
4.It is possessed of two clamping positions.two workpieces of same the vise or
|
|
of different size can be clamped with are clamped in different positions and
|
|
processed in different surfaces.
|
|
5.The vise can be using with single or setting side by side on themachine table.
|
|
6.It is widely used on machining center and other precision machine tools.
|
|
|
[Detail...]
|
| Hydraulic Machine Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q52160 | 160 | 51 | 125 | 57/50 | 60×33×24.5 | Wood-chest |
| Q52200 | 200 | 63 | 160 | 70/60 | 64×36×26 | Wood-chest |
|
|
|
| Accu-lock Precision Machine Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| QM16160A | 160 | 45 | 190 | 51/49 | 50.5×30×20 | Paper-chest |
|
|
|
| QHK Delinble Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of high-quality cast iron.
|
|
2.The accuracy of vise (parallelism and squareness) is 0.025mm/100mm.
|
|
3.The vise body can be indexed through 90 degrees in vertical direction along
|
|
large arcahaped guideway of swivel disc which can be indexed through 360
|
|
degrees in horizontal direction on the base.
|
|
4.It is widely used on machine tool in making some kinds of slots,holes
|
|
andfaces.
|
|
|
[Detail...]
|
| Q62V Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of high-quality cast iron
|
|
2.It can be fitted on the table of the machine tool as upright and horizontal
|
|
,the bottom of upright and horizontal is vertical.Cantered clamping of
|
|
workplece is pressured on the v-block by two wobbing movable jaws.
|
|
3.According to the diameters of its holding part,the double side v-biovk can be
|
|
placed reversiblly,the vise is fitted with a stop for location of the parts
|
|
4.It is used to help machines in making some kinds of slots,holes and
|
|
faces,sotable for holding the workpiece of the cylinder in shape.
|
|
|
[Detail...]
|
| OH Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of high-quality cast iron.
|
|
2.The accuracy of vise (parallelism and squareness) is 0.025mm/100mm.
|
|
3.It is widely used on milling,planing and drilling machine tools in making some
|
|
kinds of slots,hcles and faces.
|
|
|
[Detail...]
|
| OB Machine Vise |
|
|
Performance and characteristic:
|
|
1.It is made of high-quality cast iron.
|
|
2.The accuracy of vise (parallelism and squareness) is 0.025mm/100mm.
|
|
3.It is widely used on milling,planing and drilling machine tools in making some
|
|
kinds of slots,hcles and faces.
|
|
|
[Detail...]
|
| SY Arbor Presses |
|
|
Main technical paramet:
|
| Model | Pressvre
(mm) | Opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| 0.5t | 5 | 90 | 11/10 | 26×12×29 | Paper-chest |
| 1t | 10 | 110 | 17/16 | 29×14×35 | Paper-chest |
| 2t | 20 | 180 | 39/38 | 46×19×48 | Paper-chest |
| 3t | 30 | 285 | 69/67 | 48×23×63 | Paper-chest |
| 5t | 50 | 430 | 176/154 | 72×36×89 | Wood-chest |
|
|
|
| Split Vise |
|
|
Performance and characteristic:
|
|
1.Adopts the ordinary casting iron material of high quality.
|
|
2.Body flat-nose pliers can cooperate with frock use in pairs to have two more
|
|
permitted,it is all right for a lot of to cooperate and use.
|
|
3.Activity pincers body and regular pincers body join structure for swallow's
|
|
tail type,so have very good directions,because have an angle with the job mesa
|
|
the guide,the work piece does not produce going up when ciamping,it is very
|
|
conversable to operate.
|
|
4.Use on the job mesa of the milling machine more,cooperate with the machining
|
|
spare part of the milling machina.
|
|
|
[Detail...]
|
| Quick release vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q19-4K | 100 | 40 | 90 | 29/27 | 39×33×22 | Paper-chest |
| Q19-5K | 125 | 45 | 110 | 19.5/17.8 | 42×20×21 | Paper-chest |
| Q19-6K | 150 | 50 | 135 | 13/12 | 48×25×12 | Paper-chest |
|
|
|
| Lesder clamp |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q193D | 80 | 34 | 75 | 30/14 | 30×16×24 | Paper-chest |
| Q193D | 106 | 46 | 95 | 27/26 | 34×19×29 | Paper-chest |
| Q193D | 155 | 48 | 150 | 26/25 | 25×19×36 | Paper-chest |
|
|
|
| Drilling Machine Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q1965 | 65 | 16 | 45 | 11.5/10 | 26×23×20 | Paper-chest |
| Q1975/80 | 75/80 | 20 | 50 | 22/20 | 30×28×25 | Paper-chest |
| Q19100 | 100 | 23 | 75 | 34/31 | 37×34×30 | Paper-chest |
| Q19125 | 125 | 26 | 100 | 39/37 | 41×30.5×33 | Paper-chest |
| Q19150 | 150 | 30 | 125 | 37/35 | 39×24×38 | Paper-chest |
| Q19200 | 200 | 35 | 175 | 49/46 | 41×38×30 | Paper-chest |
|
|
|
| Guild-screwleading-in Drilling Machine Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q1958E | 85 | 30 | 60 | 32/30 | 36×30×27 | Paper-chest |
| Q19100E | 100 | 30 | 75 | 38/36 | 35×29.5×31.5 | Paper-chest |
| Q19120E | 120 | 30 | 100 | 40/38 | 39.5×27×37 | Paper-chest |
| Q19150E | 150 | 30 | 125 | 36/34 | 46×16.5×43 | Paper-chest |
|
|
|
| Drilling Machine Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q191/2A | 67 | 24 | 70 | 21/19 | 33×32×21 | Paper-chest |
| Q193A | 78 | 19 | 78 | 22/20 | 32×30×22 | Paper-chest |
| Q194A | 100 | 26 | 110 | 32/30 | 37×35×26 | Paper-chest |
| Q195A | 125 | 26 | 110 | 44/42 | 43×30×29 | Paper-chest |
| Q196A | 150 | 26 | 150 | 36/34 | 40×25×32 | Paper-chest |
|
|
|
| QK-Dcan slope ing type serial drilling |
|
|
Performance and characteristic:
|
|
1.QK-D can slopeing type drilling machine jig ,adopts and turns the structure in
|
|
order to slope of cocoa round,the jig pincers body can be transfered
|
|
vertically to the location in range of 90 degrees of large arc guide,lock the
|
|
fixture.
|
|
2.Very suitable for the holing and processing of inclined plane,it is reliable
|
|
to be steady,the characteristic easy to operate.
|
|
|
[Detail...]
|
| Series of Multifunction clamp |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Lengthwise stroke
(mm) | Crosswise stroke
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| Q97-80 | 80 | 30 | 65 | 70 | 65 | 6.5/6 | 24×24×14 | Paper-chest |
| Q97-100 | 102 | 35 | 90 | 80 | 80 | 10.3/9.5 | 27×27×16 | Paper-chest |
| Q97-125 | 125 | 41 | 115 | 95 | 95 | 14.2/13.5 | 29×29×17 | Paper-chest |
| Q97-150 | 152 | 42 | 135 | 100 | 100 | 17.7/16.7 | 32×32×18 | Paper-chest |
| Q97-200 | 203 | 47 | 165 | 130 | 130 | 25/26.3 | 38.5×38.5×19 | Paper-chest |
|
|
|
| Series of Multifunction clamp( have a pedestal) |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Max.opening
(mm) | Cross.max opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Angle
| Packing shape |
| Q97100B | 102 | 90 | 80 | 11.5/12 | 27×27×17.5 | 360° | Paper-chest |
| Q97125B | 125 | 115 | 95 | 16/16.5 | 29×29×18.5 | 360° | Paper-chest |
| Q97150B | 150 | 135 | 100 | 19.5/20 | 32×32×20.5 | 360° | Paper-chest |
|
|
|
| Parrot Vise |
|
|
Main technical paramet:
|
| Model | Width of jaw
(mm) | Height of jaw
(mm) | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
| LB1B | 90 | 65 | 115 | 9/8.2 | 31.5×25×13 | Paper-chest |
|
|
|
| Corner Miter Vise |
|
|
Main technical paramet:
|
| Model | Max.opening
(mm) | G.W./N.W
(kg) | Packing volume
(cm) | Packing shape |
Q19J "
| 56 | 22/20 | 55×25×29 | Paper-chest |
Q19J "
| 107 | 26/24 | 43×34×44 | Paper-chest |
|
|
|
| Other Vies or Clamp |
|
|
| Framing Vise | Bench screw |
|